Tag Reader
Version : Two versions are available.
One for horizontal-mounting, where the display is readable when the card-opening is horizontal. Notice the tiny yellow line around the display, this should be to the lower-right of the display. One for vertical-mounting, where the display is readable when the card-opening is vertical. Notice the tiny yellow line around the display, this should be to the lower-right of the display.
Vertical 
Horizontal
Switches & led’s :
From left to right, seen from the back of the reader, you’ll find :
- A push-button switch : SERVICE-switch. This transmits the ID-number of the node.
- A yellow led : SERVICE-led. Lights up when you push the service-switch. When this led flashes or is lit continuously, a severe software problem occurred in the node. ( call us )
- A red led : TRANSMIT-led
- A second red led : RECEIVE-led
There are two identical 6-way connectors at the back of the reader. One for horizontal-mounting, the other for vertical-mounting.
| pin 1 | +12V (input) | ||
| pin 2 | GND | ||
| pin 3 | NC | ||
| pin 4 | Network A | ||
| pin 5 | Earth ( shielding ) | ||
| pin 6 | Network B |
The 12V can be obtained from nodes with these outputs, such as a pneumatic beer valve controller or a post-mix controller.
