edit · history · print

Main.SetupAndInstallation History

Hide minor edits - Show changes to markup

April 25, 2007, at 03:03 PM by 81.188.94.80 -
Added line 4:
May 12, 2006, at 04:07 PM by 81.188.94.80 -
Changed lines 3-31 from:

preparing the computer creating echelon products Installing the nodes

Once the driver is installed, modify the properties of the echelon adapter, go to advanced and set the lon adapter to LON1
http://wiki.etcworld.be/uploads/Main/echelon_config.jpg
  • open the file c:\dinoboot.etc with an editor (notepad) and set the parameter [lon]
eg:
[LOCAL]
PARAMS=[LON]
  • Run the Dino application goto INIT/SETUP/ETC, Mark the N32 check box

http://wiki.etcworld.be/uploads/Main/echelon%20running.jpg If you look in the upper richt corner , you should see running in green. This means that the echelon adapter is well configured and recognized by Dino

error -1 : adapter is not recognized by windows (power of pc and back on) or reinstall the CORRECT drivers
nothing : parameter [lon] in de c:\dinoboot.etc file is not recognized.

to:
May 12, 2006, at 04:06 PM by 81.188.94.80 -
Added lines 3-7:
May 12, 2006, at 03:51 PM by 81.188.94.80 -
Changed lines 21-24 from:

nothing : parameter [lon] in de c:\dinoboot.etc file is not recognized

to:

nothing : parameter [lon] in de c:\dinoboot.etc file is not recognized.

May 12, 2006, at 03:49 PM by 81.188.94.80 -
Changed line 20 from:

error -1 : adapter is not recognized by windows (power of pc and back on) or reinstall the CORRECT drivers

to:

error -1 : adapter is not recognized by windows (power of pc and back on) or reinstall the CORRECT drivers\\

May 12, 2006, at 03:48 PM by 81.188.94.80 -
Changed line 16 from:

http://wiki.etcworld.be/uploads/Main/echelon%20running.jpg

to:

http://wiki.etcworld.be/uploads/Main/echelon%20running.jpg

May 12, 2006, at 03:48 PM by 81.188.94.80 -
Changed lines 15-16 from:

If you look in the upper richt corner , you should see running in green
http://wiki.etcworld.be/uploads/Main/echelon%20running.jpg

to:

http://wiki.etcworld.be/uploads/Main/echelon%20running.jpg If you look in the upper richt corner , you should see running in green.

May 12, 2006, at 03:47 PM by 81.188.94.80 -
Changed lines 15-16 from:

If you look in the upper richt corner , you should see running in green you should see http://wiki.etcworld.be/uploads/Main/echelon%20running.jpg

to:

If you look in the upper richt corner , you should see running in green
http://wiki.etcworld.be/uploads/Main/echelon%20running.jpg

May 12, 2006, at 03:44 PM by 81.188.94.80 -
Changed lines 15-16 from:

If you look in the upper richt corner , you should see

to:

If you look in the upper richt corner , you should see running in green you should see http://wiki.etcworld.be/uploads/Main/echelon%20running.jpg This means that the echelon adapter is well configured and recognized by Dino

error -1 : adapter is not recognized by windows (power of pc and back on) or reinstall the CORRECT drivers nothing : parameter [lon] in de c:\dinoboot.etc file is not recognized

May 12, 2006, at 03:27 PM by 81.188.94.80 -
Added lines 15-16:

If you look in the upper richt corner , you should see

May 12, 2006, at 02:57 PM by 81.188.94.80 -
Added lines 12-14:
  • Run the Dino application goto INIT/SETUP/ETC, Mark the N32 check box
May 12, 2006, at 02:48 PM by 81.188.94.80 -
Changed line 8 from:
  • open the file c:\dinoboot.etc with an editor (notepad) and set the parameter [lon]
to:
  • open the file c:\dinoboot.etc with an editor (notepad) and set the parameter [lon]
May 12, 2006, at 02:47 PM by 81.188.94.80 -
Changed lines 10-11 from:
->[LOCAL]
->PARAMS=[LON]
to:
[LOCAL]
PARAMS=[LON]
May 12, 2006, at 02:47 PM by 81.188.94.80 -
Changed lines 9-10 from:
eg: -> [LOCAL]
to:
eg:
->[LOCAL]
May 12, 2006, at 02:47 PM by 81.188.94.80 -
Changed lines 9-11 from:
eg
[LOCAL]
PARAMS=[LON]
to:
eg: -> [LOCAL]
->PARAMS=[LON]
May 12, 2006, at 02:46 PM by 81.188.94.80 -
Added lines 7-11:
  • open the file c:\dinoboot.etc with an editor (notepad) and set the parameter [lon]
eg
[LOCAL]
PARAMS=[LON]
May 12, 2006, at 02:44 PM by 81.188.94.80 -
Changed lines 4-5 from:
Once the driver is installed, modify the properties of the echelon adapter, go to advanced and set the adapter name to LON1
to:
Once the driver is installed, modify the properties of the echelon adapter, go to advanced and set the lon adapter to LON1
May 12, 2006, at 02:43 PM by 81.188.94.80 -
Changed line 6 from:

http://wiki.etcworld.be/uploads/Main/echelon_config.jpg

to:
http://wiki.etcworld.be/uploads/Main/echelon_config.jpg
May 12, 2006, at 02:43 PM by 81.188.94.80 -
Changed lines 4-6 from:
Once the driver is installed, modify
to:
Once the driver is installed, modify the properties of the echelon adapter, go to advanced and set the adapter name to LON1

http://wiki.etcworld.be/uploads/Main/echelon_config.jpg

May 12, 2006, at 02:40 PM by 81.188.94.80 -
Changed lines 4-5 from:
Once the driver are installed
to:
Once the driver is installed, modify
May 12, 2006, at 02:32 PM by 81.188.94.80 -
Changed lines 4-5 from:

Once the driver are installed

to:
Once the driver are installed
May 12, 2006, at 02:31 PM by 81.188.94.80 -
Changed lines 3-4 from:
to:

Once the driver are installed

May 12, 2006, at 02:30 PM by 81.188.94.80 -
Added lines 1-3:

Setup and installation

edit · history · print
Page last modified on April 25, 2007, at 03:03 PM