From ETC Wiki

Main: Domino-TagReader

Tag Reader

This reader works just like the normal tag reader. There are only 2 differences. First the reader is supplied with a graphical display with animation. This gives us the opportunity to rotate the text on the LCD. The reader is also supplied with a relay. (More later)
Vertical Horizontal


Switches & ledís :

From left to right, seen from the back of the reader, youíll find :

There are two identical 6-way connectors at the back of the reader. One for horizontal-mounting, the other for vertical-mounting.

pin 1+12V (input)
pin 2GND
pin 3NC
pin 4Network A
pin 5Earth ( shielding )
pin 6Network B

The 12V can be obtained from nodes with these outputs, such as a pneumatic beer valve controller or a post-mix controller.

This reader works just like the normal tag reader. There are only 2 differences. First the reader is supplied with a graphical display with animation. This gives us the opportunity to rotate the text on the LCD. The reader is also supplied with a relay. (More later)

Retrieved from http://wiki.etcworld.be/index.php?n=Main.Domino-TagReader
Page last modified on March 20, 2013, at 02:53 PM