edit · history · print

Fifo

Switches & ledís :

At the front youíll find four leds :

  • Top a yellow led : SERVICE-led. Lights up when you push the service-switch. When this led flashes or is lit continuously, a severe software problem occurred in the node. ( call us )
  • Second a red led : RECEIVE-led
  • Third a red led : TRANSMIT-led
  • A push-button switch : SERVICE-switch. This transmits the ID-number of the node.

There is a 6-way connector for the network

pin 1+12V (output max 150mA)
pin 2GND
pin 3NC
pin 4Network A
pin 5Earth ( shielding )
pin 6Network B

The 4-way connector used for supply with a transformer with built-in thermal-fuse.

pin 1hot-side first secondary
pin 2low-side first secondary
pin 3hot-side second secondary
pin 4low-side second secondary

The 36-way connector

Pin 1GND
Pin 2Out FOTOCEL1
Pin 3+12V
Pin 4+LAMP
Pin 5GND
Pin 6Out FOTOCEL2
Pin 7+12V
Pin 8+LAMP
Pin 9DRUKKNOP INPUT
Pin 10GND
Pin 11Out FOTOCEL3
Pin 12+12V
Pin 13+LAMP
Pin 14GND
Pin 15Out FOTOCEL4
Pin 16+12V
Pin 17+LAMP
Pin 18DRUKKNOP +12V
Pin 19GND
Pin 20Out FOTOCEL5 if not used, connect with +12V
Pin 21+12V
Pin 22+LAMP
Pin 23GND
Pin 24Out FOTOCEL6 if not used, connect with +12V
Pin 25+12V
Pin 26+LAMP

LED Bars:

edit · history · print
Page last modified on March 20, 2013, at 02:58 PM